BUTYL METHACRYLATE
ICSC: 1018 |
2-Methyl butylacrylate 2-Propenoic acid, 2-methyl-, butyl ester Butyl 2-methacrylate Methacrylic acid, butyl ester C8H14O2 / CH2C(CH3)COO(CH2)3CH3 Molecular mass: 142.2 ICSC # 1018 | CAS # 97-88-1 RTECS # OZ3675000 UN # 2227 EC # 607-033-00-5 November 24, 1998 Validated |
TYPES OF HAZARD/ EXPOSURE | ACUTE HAZARDS/ SYMPTOMS | PREVENTION | FIRST AID/ |
FIRE | Flammable. | NO open flames, NO sparks, and NO smoking. | Powder, AFFF, foam, carbon dioxide. |
EXPLOSION | Above 41°C explosive vapour/air mixtures may be formed. | Above 41°C use a closed system, ventilation, and explosion-proof electrical equipment. Prevent build-up of electrostatic charges (e.g., by grounding). | In case of fire: keep drums, etc., cool by spraying with water. |
EXPOSURE | PREVENT GENERATION OF MISTS! AVOID ALL CONTACT! | ||
INHALATION | Cough. Shortness of breath. Sore throat. | Ventilation, local exhaust, or breathing protection. | Fresh air, rest. Half-upright position. |
SKIN | Redness. Pain. (Further see Inhalation). | Protective gloves. Protective clothing. | Remove contaminated clothes. Rinse skin with plenty of water or shower. |
EYES | Redness. Pain. | Safety goggles. | First rinse with plenty of water for several minutes (remove contact lenses if easily possible), then take to a doctor. |
INGESTION | Abdominal pain. (Further see Inhalation). | Do not eat, drink, or smoke during work. | Rinse mouth. Refer for medical attention. |
SPILLAGE DISPOSAL | STORAGE | PACKAGING & LABELLING | ||
Collect leaking and spilled liquid in sealable sealable containers as far as possible. Absorb remaining liquid in sand or inert absorbent and remove to safe place. (Extra personal protection: filter respirator for organic gases and vapours). | Fireproof. Separated from oxidants. Cool. Dry. Keep in the dark. Store only if stabilized. | Note: D Xi symbol R: 10-36/37/38-43 S: 2 UN Hazard Class: 3 UN Packing Group: III | ||
|
BUTYL METHACRYLATE | ICSC: 1018 |
I |
| |||
PHYSICAL |
| |||
ENVIRONMENTAL | ||||
N O T E S | ||||
Health effects of exposure to the substance have not been investigated adequately. An added stabilizer or inhibitor can influence the toxicological properties of this substance, consult an expert.
|
ADDITIONAL INFORMATION | |||||
|
IMPORTANT LEGAL NOTICE: | Neither NIOSH, the CEC or the IPCS nor any person acting on behalf of NIOSH, the CEC or the IPCS is responsible for the use which might be made of this information. This card contains the collective views of the IPCS Peer Review Committee and may not reflect in all cases all the detailed requirements included in national legislation on the subject. The user should verify compliance of the cards with the relevant legislation in the country of use. The only modifications made to produce the U.S. version is inclusion of the OSHA PELs, NIOSH RELs and NIOSH IDLH values. |
- Page last reviewed: July 22, 2015
- Page last updated: July 1, 2014
- Content source: