Mining Project: Slip, Trip and Fall Hazard Identification and Remediation In Surface Mining Facilities
Principal Investigator |
|
---|---|
Start Date | 4/1/2014 |
End Date | 9/30/2014 |
Objective | To prepare a preliminary characterization of slip and fall risk factors at surface mine facilities to demonstrate the feasibility of developing a taxonomy of risk factors and to inform the development of a more detailed study. |
Topic Area | |
Research Summary
According to MSHA data, slips and falls were the second largest contributor to non-fatal injuries in the U.S. mining industry from 2003 to 2012. However, the morbidity associated with and exposure to slip, trip, and fall (ST&F) hazards has not been recently evaluated for surface mine sites. This represents a significant gap in the knowledge necessary to reduce these injuries.
This project had two research aims:
- Provide a detailed description of the morbidity and risk factors associated with ST&F at surface mining sites.
- Collect preliminary (pilot) data on exposures to ST&F hazards at surface mining facilities.
For this project, researchers analyzed archival data on non-fatal and fatal injuries recorded by MSHA to identify risk factors associated with ST&F injuries and fatalities. Researchers also identified ST&F hazards at select surface mining facilities. The findings of this pilot project were used to develop a project proposal to investigate ST&F hazards at surface mining operations.
See Also
- Advances in Remote Sensing Techniques for Monitoring Rock Falls and Slope Failures
- Assessing and Monitoring Open Pit Mine Highwalls
- Blasting Injuries in Surface Mining with Emphasis on Flyrock and Blast Area Security
- Recommendations for Evaluating & Implementing Proximity Warning Systems on Surface Mining Equipment
- Technology News 447 - Dust Collector Discharge Shroud Reduces Dust Exposure to Drill Operators at Surface Coal Mines
- Technology News 502 - A New Training Video for Aggregate Operators: Aggregate Training for the Safety Impaired
- Technology News 506 - The Sky is Falling!: NIOSH Releases Safety Video for Surface Mining Operations
- Toolbox Training For Construction Aggregate Miners
- Toolbox Training on Flyrock Awareness
- Video Motion Detection for Real-Time Hazard Warnings in Surface Mines
- Page last reviewed: 10/22/2016
- Page last updated: 10/22/2016
- Content source: National Institute for Occupational Safety and Health, Mining Program