Mining Project: Durable Support for Western U.S. Underground Metal Mines
Principal Investigator |
|
---|---|
Start Date | 5/1/2015 |
End Date | 9/30/2016 |
Objective | To reduce injuries and fatalities in western U.S. underground metal mines by reducing the falls of ground in these mines. |
Topic Area | |
Research Summary
The aim of this research was to control ground to protect miners from rock falls, collapses, etc. This pilot project sought to investigate ground fall accidents in underground metal mines in the western U.S. Falls of ground in mines continue to be one of the most serious causes of injury to miners. These ground fall accidents are directly related to falls of ground that can be measured using the Mine Safety and Health Administration (MSHA) database of Non-Fatal Days Lost (NFDL) and No Days Lost (NDL). Weak blocky ground, faults, seismic activity, and highly stressed ground are just some of the cases that lead to difficult ground control conditions. These concerns were addressed by taking a holistic look at ground support through the mining cycle at mines suffering from these hazards.
This project research sought to improve ground support by using a systematic design approach to reduce accident risk, employing state-of-the-art ground control science in a targeted program of case studies to develop engineering solutions for the ground control hazards in western underground metal mines. This research was conducted in western underground metal mines with difficult-to-mine ore bodies that are weak, blocky, highly fractured, and faulted, with altered host rock, which creates extremely weak ground conditions requiring extensive ground support where the mining method is primarily underhand cut-and-fill. All of these difficult mining conditions lead to increased ground failures that are directly related to higher NFDL and NDL injuries.
The engineering gleaned from these case studies was transferred to other mines in the west. The research conducted within the scope of this pilot project supported the development of a full project proposal. The pilot project’s desired outcome of obtaining approval as a fully funded five-year project was obtained.
Related Publication
“Jackleg Drill Injuries” by CC Clark, DJ Benton, JB Seymour, and LA Martin, published in Mining Engineering Magazine (vol. 68, no. 8, pp. 57-62), and representing significant industry and academic interest in the pilot’s safe support installation research.
See Also
- 60 Years of Rockbursting in the Coeur D'Alene District of Northern Idaho, USA: Lessons Learned and Remaining Issues
- Alternative Mining Methods in Challenging Environments
- Calibration and Verification of Longwall Stress Models
- Coal Mine Safety Applications of Seismic Monitoring
- Developments in Sealant Support Systems for Ground Control
- Ground Control Safety for Deep Vein Mines
- Ground Monitoring
- Roof Support
- Shotcrete Design and Installation Compliance Testing: Early Strength, Load Capacity,Toughness, Adhesion Strength, and Applied Quality
- Technology News 491 - NIOSH Releases Two New Safety Training Videos
- Page last reviewed: 10/27/2016
- Page last updated: 10/27/2016
- Content source: National Institute for Occupational Safety and Health, Mining Program