Mining Publication: Potential of Roof Screening to Reduce Workers’ Compensation Cost
Original creation date: December 2010
Each year more than 400 coal miners are injured (fatally and nonfatally) by rock falling from between or around roof supports. Many of these injuries can be prevented by the installation of roof screen. However, many coal mines are reluctant to use roof screen because of the added cost. The goal of this study was to determine the potential savings in workers’ compensation (WC) premiums that can be achieved due to a reduction in rock fall injuries after roof screening. The WC rate-setting methods utilized by Illinois and Kentucky were investigated in this study. Using data obtained from the Mine Safety and Health Administration, national and state WC bodies and individual insurance companies (e.g., average cost per injury, loss cost rate, number of injuries per year, number of injuries preventable each year with roof screening), baseline mines (representing two mine sizes: 67 and 150 employees) were constructed with realistic ranges for estimates of injuries and WC premium costs. Using each state’s actual WC rate-setting formulas, a sensitivity analysis was conducted to determine the total savings in WC costs after a three-year period. Annual savings in WC premiums ranged from $41,000 to $326,000 for the 67-person mine, and $96,000 to $843,000 for the 150-person mine. An economic analysis of the cost of a roof screening program at a 67-person mine was also conducted. The annual cost of a roof screening program here was estimated at $240,000. At this mine, the reduction in WC premiums alone could pay for the entire screening program.
Authors: SM Moore, JP Pollard, SK Bhatt, C Mark
Peer Reviewed Journal Article - December 2010
NIOSHTIC2 Number: 20038037
Min Eng 2010 Dec; 62(12):49-54
See Also
- A Comparison of Longwall & Continuous Mining Safety in U.S. Coal Mines 1988-1997
- Diagnosing and Controlling Moisture-Sensitive Roof in Coal Mines
- Load Capacity and Stiffness Characteristics of Screen Materials Used for Surface Control in Underground Coal Mines
- Make it Safer with Roof Screen
- Performance Characteristics for Welded Wire Screen Used for Surface Control in Underground Coal Mines
- Reduced Workers’ Compensation Costs With Roof Screening
- Rock Falls
- Roof Screening for Underground Coal Mines: Recent Developments
- Roof Screening: Best Practices and Roof Bolting Machines
- Solutions to Prevent Materials-Handling Injuries in Underground Coal Mines
- Visual Performance for Trip Hazard Detection When Using Incandescent and LED Miner Cap Lamps
- Content source: National Institute for Occupational Safety and Health, Mining Program