Mining Publication: Technology News 473 - The Explosion Hazard From Hydrogen Gas Generation Inside Sealed Frames
Original creation date: June 1998
NIOSH recently investigated ignition incidents resulting fro drilling holes into sealed and filled plow frame sections. A farmer and farm worker were seriously burned in two separate incidents that occurred in the same county in New York under similar conditions. They had just penetrated sealed sections of their plow frames with electric drills when a roar of escaping gas at high pressure was hear, and the victims were thrown back by the gas jet and engulfed in flames. The flames were quickly extinguished, but the victims suffered burns. NIOSH experts were asked to help find the cause of these hazardous incidents. Inspection of the frame sections involved in the incidents showed no discoloration, charring , or blistering of pain in the immediate vicinity of the holes. Probing the holes with a magnetized blade revealed a hard interior fill material and the presence of some metal punching. This fill material was more extensively sampled form another section that had been cut through. The revealed a wide range of metal punching that was used as ballast in these steel frames sections, which had been welded shut after the filling operation. The punching were found to consist of various forms of steel and other metals, including titanium. Stealing the holes and sampling the gases present revealed the depletion of oxygen from the original air atmosphere and the presence of hydrogen. The hydrogen concentration was found to increase with time under sealed conditions. The pressure in the resealed sections also increased with time at a steady rate.
Authors: National Institute for Occupational Safety and Health
Technology News - June 1998
NIOSHTIC2 Number: 20000573
Pittsburgh, PA: U.S. Department of Health and Human Services, Public Health Service, Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health, Technology News 473, 1998 Jun :1-2
See Also
- Coal Mine Safety Achievements in the USA and the Contribution of NIOSH Research
- Ignition of Methane-Air Mixtures by Laser Heated Small Particles
- Methane-Air Mixtures Ignited by CW Laser-Heated Targets on Optical Fiber Tips: Comparison of Targets, Optical Fibers, and Ignition Delays
- NIOSH Hazard ID 4 - Ignition Hazard from Drilling into Sealed Frames of Agricultural Equipment
- NIOSH Mining Update - New Publications 1995-96
- Noise Source Identification on a Horizontal Vibrating Screen
- Performance of a Light-scattering Dust Monitor in Underground Mines
- Proceedings: New Technology for Ground Control in Retreat Mining
- A Summary of U.S. Mine Fire Research
- USBM Health and Safety Legacy Continues Under NIOSH
- Content source: National Institute for Occupational Safety and Health, Mining Program