Mining Publication: Coal Mine Burst Prevention Controls
Original creation date: July 2008
Coal mine bursts have represented a major hazard for U.S. mining operations for more than 90 years. During this time, many prevention controls have been developed and tested. This paper reviews 11 prevention control techniques. Although coal mine bursts are not common events in most underground coal mines, their occurrence almost always requires a change in mining practice. Over the many years of dealing with these hazards, specialized requirements for layouts and novel extraction sequences have been developed on a site specific basis. The keys to mitigating risks are to properly assess the coal burst hazards and to possess the knowledge and skills to prevent or remediate their occurrence.
Authors: AT Iannacchione, SC Tadolini
Conference Paper - July 2008
NIOSHTIC2 Number: 20034273
Proceedings of the 27th International Conference on Ground Control in Mining, July 29 - July 31, 2008, Morgantown, West Virginia. Peng SS, Mark C, Finfinger GL, Tadolini SC, Khair AW, Heasley KA, Luo-Y, eds., Morgantown, WV: West Virginia University, 2008; :20-28
See Also
- 60 Years of Rockbursting in the Coeur D'Alene District of Northern Idaho, USA: Lessons Learned and Remaining Issues
- Comparison of Ground Conditions and Ground Control Practices in the United States and Australia
- Current Trends in Reducing Ground Fall Accidents in US Coal Mines
- Diagnosing and Controlling Moisture-Sensitive Roof in Coal Mines
- Dynamic Failure in Deep Coal: Recent Trends and a Path Forward
- Identification of Areas at Risk for Coal Bursts in Deep Cover Room and Pillar Mines
- The Role of Gas Desorption in the Energetic Failure of Coal
- Roof Screening for Underground Coal Mines: Recent Developments
- Technology News 526 - Proceedings of the International Workshop on Rock Mass Classification in Underground Mining
- Variation of Horizontal Stresses and Strains in Mines in Bedded Deposits in the Eastern and Midwestern United States
- Page last reviewed: 9/21/2012
- Page last updated: 9/21/2012
- Content source: National Institute for Occupational Safety and Health, Mining Program