Mining Contract: Deep Coal Mine Safety Studies to Promote Development of Recommendations for Deep Coal Mine Safety through Monitoring Seismic Events
Contract # | 200-2008-25438 |
---|---|
Start Date | 6/5/2008 |
End Date | 12/31/2009 |
Research Concept | This contract investigated and reported on the state-of-the-art in mine seismic monitoring systems and methodologies as applied to deep coal mining. The purpose was to examine the susceptibility of mines to seismic activity and identify means of adapting practical technology to the mining environment to better protect miners working at depths greater than 1,500 feet. |
Topic Area |
Contract Status & Impact
This contract is complete. To receive a copy of the final report, send a request to mining@cdc.gov.
In October 2008, the University of Utah (UUT) conducted a meeting of international experts in monitoring mine seismicity in Salt Lake City, Utah. The results of that meeting were prepared for presentation to a group of industry, labor, and regulatory agency stakeholders in Price, UT, on April 14th, 2009. Input from these stakeholders was incorporated into a final document assessing mine seismic monitoring technology and conveyed to NIOSH in a June 2009 report.
The UUT seismic observatory entered into an agreement with the National Science Foundation to acquire seismic stations near seismically active mines and has incorporated that data stream into its regional seismic monitoring system. The UUT engaged faculty and post-doctoral researchers to investigate techniques to enhance the location precision of regional seismic monitoring. Technical papers were prepared and submitted to peer reviewed journals and final results summarized in the June 2009 final contract report.
The UUT completed a calibration analysis of the LAModel software using a detailed instrumentation dataset from a longwall coal mine. The product of this effort was reported in a successfully defended doctoral dissertation and final results summarized in the June 2009 final contract report.
Determining the value of underground seismic monitoring points to augment surface regional monitoring was performed using simulated data in analysis software to supplement actual surface sensor data. Peer-reviewed publications were generated, and the results defining requirements for these hybrid systems to provide meaningful results was included in the June 2009 final report.
See Also
- Coal Mine Burst Prevention Controls
- Coal Mine Safety Applications of Seismic Monitoring
- Comparison of Ground Conditions and Ground Control Practices in the United States and Australia
- Current trends in Reducing Ground Fall Accidents in US Coal Mines
- Current Trends in Reducing Ground Fall Accidents in US Coal Mines
- Rock Bursting and Seismicity During Ramp Development, Lucky Friday Mine, Mullan, Idaho
- Roof Screening for Underground Coal Mines: Recent Developments
- Seismic Event Data Acquisition and Processing: Distribution and Coordination Across PC-Based Networks
- Technology News 526 - Proceedings of the International Workshop on Rock Mass Classification in Underground Mining
- Variation of Horizontal Stresses and Strains in Mines in Bedded Deposits in the Eastern and Midwestern United States
- Page last reviewed: 7/18/2016
- Page last updated: 7/18/2016
- Content source: National Institute for Occupational Safety and Health, Mining Program